Hi-E Series High Efficiency - Hydraulic and Lubrication Filter Bags

Our HI-E series of bag filters meets the most stringent needs for fine process, hydraulic fluid, and lubricant filtration.

All are made of unique microfiber materials, designed to increase the efficiency and dirt-holding capacities of these bags.

Microfiber Material Construction

Polyester or polypropylene microfibers and standard fibers are variably calendered to produce a single layer of microfiber material. Our unique construction can provide filtration to a 1 micron rating. Polyester microfiber material should be used where oil adsorption is not desirable or where higher temperatures are required.

Filtration Level

These bags have been tested by an independent laboratory to determine the filtration efficiency and dirt holding capabilities for each. They have been manufactured so that the efficiencies for both polyester and polypropylene are identical.

PEMF/POMF Series

The microfiber bag is encased in spun-bonded material inside and out to prevent bag material migration into the fluid stream. Heavy-duty handles for ease in removal are a standard feature. The fully shaped bottoms enhance the pressure capacities of these bags.

THE PEMF/POMF SERIES HAS 4.4 SQ. FT. OF SURFACE AREA.

500 Series, Graded Density Bags

The 500 Series FAT BAGS® have approximately four times the dirt-holding capacity of our PEMF/POMF series bags at equivalent filtration levels. You can now use bags, where performance levels previously required cartridges. These Graded Density Bags are made of multiple layers of microfibers and standard fibers variably calendered, providing filtration to 1 micron. Heavy-duty handles for ease in removal are a standard feature. The fully shaped bottoms enhance the pressure capacities of the bag.

THE 500 SERIES HAS 9 LAYERS OF MICROFIBER MATERIAL, EACH WITH 4.4 SQ. FT. OF SURFACE AREA.

Bag-Sized Pleated Cartridges

With the PL Series pleated cartridges, we’ve combined the best features of bags and cartridges into one. It has the advantages of a bag; low in cost, easy to handle, and contaminant is trapped inside, but with the greater surface area and dirt-loading capabilities of pleated cartridges. The seams in these filter elements are ultrasonically welded, eliminating the problems associated with sewn seams. The microfiber material is sandwiched between two flow-enhancing polypropylene mesh screens, then pleated. The cartridge bottom and top sealing ring are made of solid molded polypropylene and are welded to the ends of the pleated cylinder without the use of adhesive. The sealing ring is a pliable gasket, increasing the efficiency and integrity of the seal.

THE PL SERIES HAS 25 SQ. FT. OF SURFACE AREA.

How to Order

ordering-info